Come to Zigs Showroom at ---> 12700 SW Canyon Rd - Beaverton Oregon 97005. Click on Logo for Map.
For Product Information Call - 1 (503) 277-2232
Parts Orders ONLY Call - 1 (800) 288-7260
Press Button to E-Mail your Questions / Comments to : zigs@zigsstreetrods.com


SERPENTINE BRACKETS



SERPENTINE POWER STEERING PULLEY FOR SAGINAW PUMP

     Precision machined in the USA. This Serpentine power steering pulley fits the Saginaw power steering pump and matches up to our serpentine pulley kits.
Power Steering Type
BSFM1030PC          1/8" Keyway Shaft             $89.95
BSFM1035PC Press-on Shaft $89.95
                       



SMALL BLOCK


SMALL BLOCK CHEVY

LATE HEAD SERPENTINE BRACKET KIT

FOR USE WITH SHORT WATER PUMP ONLY


      
PARTS REQUIRED FOR THE SERPENTINE BRACKET ASSEMBLY
FOR ALTERNATOR & AIR CONDITIONER:
QTY   PART #
1 102 or 103 (Alternator bracket)
1 132 or 133 (Air conditioner bracket)
1 508 (508 Compressor with Serpentine pulley)
1 2011 (Water pump pulley, 6" diameter, aluminum)
1 2012 (Crankshaft pulley, 6 7/8" diameter, aluminum)
1 2014 no fan (Alternator pulley, 2 3/4" diameter, aluminum)
1 1888 (Water pump, aluminum, reverse rotation)
1 K060815 (Gates, 6 rib, 81 1/2" long serpentine belt)
FOR USE WITH POWER STEERING PUMP,
YOU WILL NEED THE FOLLOWING PARTS:
QTY  PART #
1 302 or 303 (Power steering bracket)
1 2013 (Crankshaft pulley with 'V' groove, in place of part # MCP-12 listed above)



Tru Trac Serpentine System for Small Block Chevy/Ford
 
Tru Trac features:
- Easy Straight Forward assembly, No spacers or washers to fool with.
- All Hardware and Fasteners are included with each kit. No Running around for anything!
- Entire Tru Trac System mounts to engine block, allowing any cylinder head/intake configuration.

Each Kit Includes;
- New Polished Power Master 105 amp one wire alternator.
- Polished Billet Aluminum Alternator Bracket
- Polished Billet Aluminum Alt Fan and Pulley
- New Polished Sanden SD-7 Compressor with Polished Manifold Block and Fittings
- Polished Billet Aluminum Compressor Bracket
- Polished Billet Aluminum Compressor Cover
- Polished Billet Aluminum Support Bracket
- New Edelbrock Aluminum Reverse Flow Water Pump
- Polished Billet Aluminum Water Pump Pulley with Hard Coat Anodized belt surface to reduce wear
- Polished Billet Aluminum Tensioner Specifically Made For The System
- Polished Billet Aluminum Tensioner Pulley with Hard Coat Anodized belt surface to reduce wear
- Polished Billet Aluminum Crank Pulley
- Stainless Fasteners
- Serpentine Belt
Kit With Power Steering Also Includes:
- New Aluminum Power Steering Pump (Sweet MFG.)
  with AN Fittings (-6&-10) Flow
  Tested and Pre Set to 850psi
- Polished Billet Aluminum Power Steering Pulley
- Polished Billet Aluminum Power Steering Bracket
 
BS13125      SB Chevy Serpentine System w/o Power Steering w/o A/C     
$1565.00
BS13225 SB Chevy Serpentine System w/ Power Steering w/o A/C $1930.00
BS13120 SB Chevy Serpentine System w/o Power Steering w/ A/C $1980.00
BS13220 SB Chevy Serpentine System w/ Power Steering w/ A/C
$2290.00
BS13625      SB Ford Serpentine System w/o Power Steering w/o A/C     
$1700.00
BS13605 SB Ford Serpentine System w/ Power Steering w/o A/C $2080.00
BS13620 SB Ford Serpentine System w/o Power Steering w/ A/C $2135.00
BS13600 SB Ford Serpentine System w/ Power Steering w/ A/C
$2495.00



TOP MOUNT ALTERNATOR ONLY KIT - PASSENGER SIDE

     Designed for use with the popular GM 60 to 80 amp alternator.
KIT INCLUDES
Top mount passenger side alternator bracket, alternator pulley with fan and nose cone. Water pump pulley with nose cone and crank pulley. Stainless steel hardware is included.
BSFM2110PC                            $314.95
                       



TOP MOUNT ALTERNATOR & POWER STEERING KIT - PASSENGER SIDE

     Designed for use with the popular GM 60 to 80 amp alternator.

KIT INCLUDES
Top mount passenger side alternator bracket, alternator pulley with fan and nose cone. Water pump pulley with nose cone and crank pulley. Saginaw power steering pump bracket and pulley. Stainless steel hardware included.
Power Steering Type
BSFM2111PC         
Keyway Shaft
         $524.95
BSFM2112PC
Press-on Shaft
$524.95
                       


TOP MOUNT ALTERNATOR WITH A/C & POWER STEERING - PASSENGER SIDE

     Designes for use with the popular GM 60 to 80 amp alternator and Sanden 508 A/C compressor.

KIT INCLUDES
Top mount passenger side alternator bracket, top mount A/C bracket for Sanden 508 compressor, alternator pulley with fan and nose cone. A/C clutch cover, water pump pulley with nose cone, crank pulley, and two idler pulleys. Saginaw Power steering pump bracket and pulley. Stainless steel hardware included.
Power Steering Type
BSFM2113PC         
Keyway Shaft
         N/A
BSFM2114PC
Press-on Shaft
N/A
                       



MID MOUNT ALTERNATOR ONLY KIT - PASSENGER SIDE

     Designed for use with the popular GM 60 to 80 amp alternator.
KIT INCLUDES
Mid mount passenger side alternator bracket, alternator pulley with fan and nose cone. Water pump pulley with nose cone and crank pulley. Stainless steel hardware included.
BSFM2120PC                            $314.95
                       


MID MOUNT ALTERNATOR & POWER STEERING KIT - PASSENGER SIDE

     Designed for use with the popular GM 60 to 80 amp alternator.

KIT INCLUDES
Mid mount passenger side alternator bracket, alternator pulley with fan and nose cone. Water pump pulley with nose cone and crank pulley. Saginaw power steering pump bracket and pulley. Stainless steel hardware is included.
Power Steering Type
BSFM2121PC         
Keyway Shaft
         $524.95
BSFM2122PC
Press-on Shaft
$524.95
                       


SMALL BLOCK CHEVROLET SERPENTINE PULLEY KIT

     Precision machined in the USA. This serpentine pulley kit is engineered for small block Chevrolet motors running a long water pump.

KIT INCLUDES
Alternator pulley with fan and nose cone.
Water pump pulley with nose cone.
Crank Pulley.
BSFM3110PC         
        
         $249.95
                       



BIG BLOCK


Tru Trac Serpentine System for Big Block Chevy
 
Tru Trac features:
- Easy Straight Forward assembly, No spacers or washers to fool with.
- All Hardware and Fasteners are included with each kit. No Running around for anything!
- Entire Tru Trac System mounts to engine block, allowing any cylinder head/intake configuration.

Each Kit Includes;
- New Polished Power Master 105 amp one wire alternator.
- Polished Billet Aluminum Alternator Bracket
- Polished Billet Aluminum Alt Fan and Pulley
- New Polished Sanden SD-7 Compressor with Polished Manifold Block and Fittings
- Polished Billet Aluminum Compressor Bracket
- Polished Billet Aluminum Compressor Cover
- Polished Billet Aluminum Support Bracket
- New Edelbrock Aluminum Reverse Flow Water Pump
- Polished Billet Aluminum Water Pump Pulley with Hard Coat Anodized belt surface to reduce wear
- Polished Billet Aluminum Tensioner Specifically Made For The System
- Polished Billet Aluminum Tensioner Pulley with Hard Coat Anodized belt surface to reduce wear
- Polished Billet Aluminum Crank Pulley
- Stainless Fasteners
- Serpentine Belt
Kit With Power Steering Also Includes:
- New Aluminum Power Steering Pump (Sweet MFG.)
  with AN Fittings (-6&-10) Flow
  Tested and Pre Set to 850psi
- Polished Billet Aluminum Power Steering Pulley
- Polished Billet Aluminum Power Steering Bracket
 
BS14125      BB Chevy Serpentine System w/o Power Steering w/o A/C     
$1650.00
BS14225 BB Chevy Serpentine System w/ Power Steering w/o A/C $2030.00
BS14120 BB Chevy Serpentine System w/o Power Steering w/ A/C $2080.00
BS14220 BB Chevy Serpentine System w/ Power Steering w/ A/C
$2390.00



TOP MOUNT ALTERNATOR ONLY KIT - PASSENGER SIDE

     Designed for use with the popular GM 60 to 80 amp alternator.
KIT INCLUDES
Top mount passenger side alternator bracket, alternator pulley with fan and nose cone. Water pump pulley with nose cone and crank pulley. Stainless steel hardware is included.
BSFM2210PC                            $314.95
                       



TOP MOUNT ALTERNATOR & POWER STEERING KIT - PASSENGER SIDE

     Designed for use with the popular GM 60 to 80 amp alternator.

KIT INCLUDES
Top mount passenger side alternator bracket, alternator pulley with fan and nose cone. Water pump pulley with nose cone and crank pulley. Saginaw power steering pump bracket and pulley. Stainless steel hardware included.
Power Steering Type
BSFM2211PC         
Keyway Shaft
         $524.95
BSFM2212PC
Press-on Shaft
$524.95
                       


TOP MOUNT ALTERNATOR WITH A/C & POWER STEERING - PASSENGER SIDE

     Designes for use with the popular GM 60 to 80 amp alternator and Sanden 508 A/C compressor.

KIT INCLUDES
Top mount passenger side alternator bracket, top mount A/C bracket for Sanden 508 compressor, alternator pulley with fan and nose cone. A/C clutch cover, water pump pulley with nose cone, crank pulley, and two idler pulleys. Saginaw Power steering pump bracket and pulley. Stainless steel hardware included.
Power Steering Type
BSFM2213PC         
Keyway Shaft
         N/A
BSFM2214PC
Press-on Shaft
N/A
                       



MID MOUNT ALTERNATOR ONLY KIT - PASSENGER SIDE

     Designed for use with the popular GM 60 to 80 amp alternator.
KIT INCLUDES
Mid mount passenger side alternator bracket, alternator pulley with fan and nose cone. Water pump pulley with nose cone and crank pulley. Stainless steel hardware included.
BSFM2220PC                            $314.95
                       


MID MOUNT ALTERNATOR & POWER STEERING KIT - PASSENGER SIDE

     Designed for use with the popular GM 60 to 80 amp alternator.

KIT INCLUDES
Mid mount passenger side alternator bracket, alternator pulley with fan and nose cone. Water pump pulley with nose cone and crank pulley. Saginaw power steering pump bracket and pulley. Stainless steel hardware is included.
Power Steering Type
BSFM2221PC         
Keyway Shaft
         $524.95
BSFM2222PC
Press-on Shaft
$524.95
                       


BIG BLOCK CHEVROLET SERPENTINE PULLEY KIT

     Precision machined in the USA. This serpentine pulley kit is engineered for small block Chevrolet motors running a long water pump.

KIT INCLUDES
Alternator pulley with fan and nose cone.
Water pump pulley with nose cone.
Crank Pulley.
BSFM3210PC         
        
         $249.95
                       



For Product Information Call - 1 (503) 277-2232
Parts Orders ONLY Call - 1 (800) 288-7260
Press Button to E-Mail your Questions / Comments to : zigs@zigsstreetrods.com
  All Prices subject to change without notice.
Last Updated:
  Copyright © 2000-2003 - Zig's Street Rod Center Inc.