|
|
|||
|
|
|
|
|
Lighting
Head Lighting 40's & 50's Frenched Headlamps 30's Frenched Sealed Beams '37 - '39 Ford Headlamps 3rd Brake Lights Flush Mounted Elliptical Billet Tail Lights Flush Mounted Billet Elliptical Rectangular Interior/Door Lights Elliptical Interior/Door Lights Interior & Door Lights Front Turn Signals Flush Mounted Head Light Conduit Frenched License Box
HEAD AND TAIL LIGHTS
FRENCHED HEADLAMPS FOR RODS AND CUSTOMS OF THE 40'S & 50'S
Hagan
frenched head lamps make the task of head light restyling easy. Our lamp assemblies utilize Standard halogen sealed beams and are fully adjustable so proper aiming is a snap. The lamp assemblies and Trim rings install from the front. All parts are crafted from 20 gauge steel and we form each trim ring from a solid piece of steel eliminating unsightly seams. Hagans' unique clip fastening design replaces the need for screws and gives your headlamps a clean look. Don't wrestle with old rusty parts that are a Hassle to fit and have to be installed from the under side of the fender. Hagan delivers style and performance. Try a pair and experience what other rodders are talking about!
These buckets weld in. The lamps install from the front. Trim rings are held in place with 3 spring clips so no hardware shows. You can use sealed beams, or pop in a set of our Snake Eye or Blue Dot lamps now available with turn signals.
MAKE AND YEAR CHROME BARE STEEL MAKE AND YEAR CHROME BARE STEEL BUICK 40'-57' H4050C H4050BS METROPOLITAN 54'-62 H4050C H4050BS CADILLAC 41 '-53' H4050C H4050BS MERC 42'-56' H4050C H4050BS CHEVY 40'-57' H4050C H4050BS NASH 40'-54' H4050C H4050BS CHRYSLER 39'-56' H4050C H4050BS OLDS 40'-56' H4050C H4050BS CROSLEY 39'-52' H4050C H4050BS PACKARD 41 '-53' H4050C H4050BS DESOTO 41 '-55' H4050C H4050BS PLYMOUTH 40'-54' H4050C H4050BS DODGE 39'-56' H4050C H4050BS PONTIAC 41 '-54' H4050C H4050BS FORD 41 '-57' H4050C H4050BS STUDEBAKER 39'-56' H4050C H4050BS LINCOLN 42'-56' H4050C H4050BS *IF YOUR VEHICLE IS NOT LISTED PLEASE CALL FOR APPLICATION*
MODEL PRICE H4050BS $230.00 H4050C $250.00
FRENCHED SEALED BEAM CONVERSION FOR RODS OF THE 30'S
Hagan headlamps make night time driving enjoyable by illuminating the road with halogen head lamps. Retrofit your existing lamp buckets with fully adjustable lamp assemblies that utilize standard halogen sealed beams. All parts are crafted from 20 gauge steel. We form each trim ring from a solid piece of steel eliminating those unsightly seams. Our unique clip fastening design replaces the need for screws and gives your headlamps a smooth look. Safety and performance! You'll receive both when you bolt in a set of Hagans.
These headlamp sets can be bonded or welded in place. They accept sealed beams and the 825 or 875 set can use our Blue Dot or Snake Eye Lamps which are available with turn signals.
*IF YOUR VEHICLE IS NOT LISTED CALL AND HAVE THE FOLLOWING INFORMATION READY.
MAKE AND YEAR: CHROME BARE STEEL MAKE AND YEAR: CHROME BARE STEEL CHEVY '37-'38 H775C H775BS OLDS 34'-36 & 38-39 H825C H825BS CHEVY 39 H825C H825BS OLDS 37' H775C H775BS BUICK 36' H825C H825BS CHRYSLER 36' H825C H825BS BUICK 37'-38' H775C H775BS PLYMOUTH 35'-38' H825C H825BS BUICK 39' H825C H825BS STUDEBAKER 35'-36' H825C H825BS DODGE 35'-37' & 39 H825C H825BS NASH/LAYFETTE 37' H825C H825BS DODGE 34 & 38' H875C H875BS Willys '37 H775C H775BS PONTIAC 34 & 37'-39 H825C H825BS
PART # PRICE PART # PRICE H775BS $185.00 H775C $230.00 H825BS $185.00 H825C $230.00 H875BS $185.00 H875C $230.00
'37 -'39 Fords Headlamps
Bare Steel $270.00
Chrome CallThese sets bolt in! Lamps snap in and adjust easily. Install a set of Snake Eye or Blue Dot lamps with turn signals and your done!
Make Year Chrome Bare Steel Ford '37 call H37B Ford '38 call H3939B Ford '39 standard call H3939B Ford '39 deluxe call call Ford '40 standard call call Ford '40 deluxe call call
YOUR CAR NOT LISTED? CALL ZIG'S WITH THE DIMENSIONS ...... ONE OF OUR SETS MAY FIT.HOW TO ORDER
(please give us the following even if your car is listed)
1. What make, model, year
2. Are your buckets style A or B
3. Measure the length and the dimensions shown.
This bucket style has a raw edge and usually has a stainless steel trim. Measure the O.D., I.D. and the length.
This bucket style has a bead rolled in the edge that the trim ring clamped onto. Measure the O.D. (where the trim ring met the bucket) and the length.
FLUSH MOUNT LIGHTING
TAIL LIGHTS, FRONT SIGNALS, 3rd BRAKES
IF YOU'RE GOING TO FLUSH MOUNT YOUR LIGHTS HAGANS ARE THE WAY TO DO IT! OUR LIGHT KITS ARE CRAFTED FROM 16 AND 20 GAUGE STEEL. HOUSINGS AND SOCKETS ARE RUBBER SEALED TO KEEP THE WEATHER OUT! DOUBLE FILAMENT 1157S ILLUMINATE OUR PRISMATIC LENS AND GIVE YOU STOP, TURN, AND TAIL LIGHTS. LENSES BEND TO FIT THE CURVE OF YOUR PANEL AND ARE SAND-ABLE. HOUSING DESIGN, ALLOWS YOU TO CONTOUR OPENING FOR A WATER TIGHT FIT. YOUR SURE TO BE SEEN FROM THE REAR WHEN YOU LIGHT IT UP WITH HAGAN FLUSH TAIL LAMPS AND THIRD BRAKE LIGHTS!
FRONT TURN SIGNALS
contents:
2- lenses
2- light boxes
2- steel face plates
t-bolt mounts
rubber seals
wire pigtails
bulbs
instructions
TAIL LIGHTS
contents:
2- lenses
2- light boxes
2- steel face plates
t-bolt mounts
rubber seals
wire pigtails
bulbs
instructions
contents:
steel face plate
Light box 1- lens
t-bolt mounts
rubber seals
wire pigtails
bulbs
instructions
HOW TO SELECT THE RIGHT PARTS
1. Choose which lens style you prefer
2. Determine the length of the lensLength Rectangular Double Slot Angled Slot Single Slot
3. Choose either standard profile or low profile light boxes
PRICE/pr.
Frenched License Box
comes with halogen lamp and fasteners
HFLP-L $72.50
Elliptical 3rd Brake Light
Elliptical 3rd Brake Light Our elliptical 3rd brake light can be molded right into the body. The extra bright lens is wrapped in a polished billet aluminum bezel which then slips into the back housing for a secure precision fit. 4" W x 1-3/4" H x 2" D
BS62520 Elliptical 3rd Brake Light N/A
3rd Brake Lights
Hot rods are notorious for having nearly invisible taillights. Protect your assets with Billet Specialties 3rd lights available in two styles, oval or rectangular. Both mount easily on rear deck. Oval style features a swivel base to allow proper adjustment to rear window angle while rectangular style has a fixed position base.
BS62220 3rd Brake Oval, Polished $49.95
Elliptical Interior Lights and Door Lights
Keep the smooth lines of your interior in tact with these elliptical interior and door lights. 4" W x 2" H x 1" D
BS60320 Interior Light White / White $38.95 BS60420 Door Light Red / White $38.95
Interior & Door Lights
These interior lights are more than a decorative ornament. They are fully functional and provide ample light For the driver and passengers. Designed to be used in door panel. consoles and headliners. Size is 1-1/2" x 3-5/8" x 2".
BS60120 Int. light w/all white lenses, Polished $38.95 /Each BS60220 Door light w/red &white lenses, Polished $38.95 /Each
Taillights
Give your competition something to stare at with our billet aluminum taillights! These taillights feature a plated steel housing and a 1-1/2" x 6" billet aluminum faceplate, O.E.M. style lenses provide brighter lighting so the guy behind you doesn't get too close of a look at your car!
BS61120 Taillights Polished N/A /Pair BS61220 Taillights Open Bezel Polished N/A /Pair BS61320 Taillights Slot Bezel Polished N/A /Pair
Elliptical Taillights
Our new elliptical taillights are available in two sizes. Extra bright lenses make them as functional as they are cool. Small elliptical taillights are perfect for mounting in fenders. Dual element bulb for brake / turn signal and running light functions. Large 6"W x 2-1/8"H x 4"D Small 4"W x 1-3/4"H x 4"D
BS61420 Elliptical Taillights Large N/A BS61520 Elliptical Taillights Small N/A
Rectangular Taillights
Our new rectangular taillights are available with or without reverse lights. Both styles feature extra bright lenses for maximum visibility. Reverse Lights are a great safeguard against accidental meetings! Dual element bulb for brake / turn signal and running light functions. 7-5/8"W x 1-5/8"L x 4" D.
BS61620 Rectangular Taillights N/A BS61720 Rectangular Taillights w/reverse light N/A
Use this new product to protect and hide and protect those headlight wires to your externally mounted headlights.
LHL1900 $52.95
|
|
|
|
|
| All Prices subject to change without notice. |
Last Updated:
|
||
| Copyright © 2000-2003 - Zig's Street Rod Center Inc. | |||
