|
|
|||
|
|
|
|
|
|
Parts:
|
||||
| (1) | 3/4 " x 41 " sway bar | (4) | 3/8-24xl-1/4" bolts | |
| (2) | saddle brackets | (4) | 3/8-24 nylox nuts | |
| (2) | flat brackets | (4) | 3/8- flat washers | |
| (2) | sway bar urethane bushings | (2) | 3/8-16x9" bolts | |
| (2) | tube spacers | (2) | 3/8" nylox nuts | |
| (8) | link bushings | (8) | 3/8" cupped washers | |
Installation Notes:
| 1. | The sway bar mounts behind the axle and under the rails. Drill 3/8" holes 4-5/8" behind the front face of the shock cross member and 1-3/8" from the outside edge of the rails. Drill the rear holes for the brackets 3-1/2" behind the first holes. |
| 2. | Put the urethane bushings on the sway bar. Sandwich the urethanes between the saddle brackets and the flat ones and attach to the bottom of the rail using 3/8-24xl-1/4" bolts, nylox nuts and washers under each nut. |
| 3. | Attach the sway bar to the hole on the 5-hole plate using the 9" bolt and bushings. The order is: bolt, cupped washer, bushing, 5-hole plate, bushing, cupped washer, tube spacer, cupped washer, bushing, sway bar, bushing, cupped washer, and nylox nut. |
|
|
|
|
|
| All Prices subject to change without notice. |
Last Updated:
|
||
| Copyright © 2000-2003 - Zig's Street Rod Center Inc. | |||