Parts: |
||||
(1) | rail bracket | (1) | 3/8" female heim | |
(1) | pedal bracket | (1) | 3/8-24xl 1/2" bolt | |
(1) | pedal | (8) | 3/8-24xl" bolt | |
(1) | 1/2-20x1" bolt | (9) | 3/8-24 nylok nut | |
(1) | 1/2x 1-1/4" flat washer | (9) | 3/8" flat washer | |
(1) | 1/2" lock washer |
1. | The rail bracket bolts to your frame using four each of the 3/8-24x1" bolts, 3/8-24 nylok nuts, and 3/8 washers under the nuts. |
2. | The pedal bracket bolts to the rail bracket using four each of the 3/8-24xl" bolts, 3/8-24 nylok nuts, and 3/8 washers under the nuts. |
3. | The pedal slides on to the round pivot bar and is secured with the 1/2-20xl" bolt, 1/2" flat washer, and 1/2" lock washer. |
4. | Bolt the booster bracket on and thread a jam nut on the push-rod followed by the 3/8" female heim. Thread the heim so that the pedal has as much stroke as possible without it being topped-out. Then, bolt the heim on using the 3/8-24xl 1/2" bolt, 3/8-24 nylok nut, and 3/8 washer under the nut. |
All Prices subject to change without notice. |
Last Updated:
|
||
Copyright © 2000-2003 - Zig's Street Rod Center Inc. |